Sand Management posts

SAHARA CASE STUDY Eagle Ford Operator Reduces Equipment Footprint by 66% with the Sahara Advanced Sand CycloneShare this PostLocation: South TexasTHE PROBLEM An operator in Eagle Ford was using outdated flowback practices and low-tech equipment. On a 6-well setup, the operator had 3 sand separators per well, for a total of 18 sand separators. Due to this large number of Read more

SmartSahara Case Study EnerCorp Resolves Internal Sand Quantification and Monitoring Issue with Innovative New Solution: SmartSaharaLocation: PermianThe Problem One of EnerCorp’s long-term clients, that uses the Sahara Advanced Sand Cyclone on their wells during flowback, was looking for a way to get real-time internal sand quantification and monitoring. While the Sahara Advanced Sand Cyclone removed over 97% of sand from Read more

Data-Driven Case Study MidCon Operator Saves Hundreds of Dollars a Day for 100+ Days with Sahara Advanced CycloneLocation: Midcontinent RegionThe Problem An operator in the MidCon region was fighting extreme amounts of sand during flowback which was carrying over past the sand knockout causing damage to their production equipment. With so much damage to their iron and chokes, they were Read more

Cost Savings Case Study Optimize labor costs, minimize emissions, and improve efficiency with the Sahara Facility CycloneLocation: CanadaThe Problem: A major producer in the Montney zone in Canada had a 10-well pad in the steady state phase and was looking to cut costs and make production more efficient. They had been using individual well desanding units for each well, which Read more

High volumes of sand are typically associated with the flowback stage. This is when operators need to use sand management equipment to ensure no sand gets into the production facility and causes extensive damage.  However, in many cases, operators still see high volumes of sand during the steady state phase as well. While the sand volume isn’t typically high enough Read more

EnerCorp offers production fabrication for flowback equipment and beyond Some operators choose off-the-shelf equipment like sand filters and oilfield separators; however, many know that a customized piece of production equipment — that is crafted according to the requirements of your well — yields better performance.  Customized equipment puts innovation at the forefront, by thinking ahead to potential obstacles and developing Read more

How do you know which production equipment fabricator to go to? When you’re looking for oil and gas production equipment for flowback and sand management, sometimes the best option is to have it custom made from a production equipment fabricator. While off-the-shelf equipment like sand filters and oilfield separators can do the job, in certain situations, a customized piece of Read more

Data-Driven Case Study EnerCorp Saves Client from Erosion Damages with Data-Driven TechnologyLocation: PermianThe Problem One of EnerCorp’s clients in the Permian region had their wells open and flowing for several weeks when we noticed a trend of extreme high velocity on the inlet of the Sahara Advanced Sand Cyclone. The flow rates were significantly higher than expected, and if they Read more

At EnerCorp, we don’t just manage sand; we redefine the rules of the game. We’ve drawn a line in the sand, and it’s where innovation meets excellence. Read more

At EnerCorp, meeting the needs of our customers is our main priority. We spend a lot of time analyzing market trends in order to determine what our customers are going to need months down the road so that we can be adequately prepared with our service offerings. Read more